Tenax Glaxs Fast is a two-component adhesive on a cartridge basis. It offers high bond strength on all natural materials, quartz and ultra-compact surfaces such as Dekton and Lapitec and is designed for mitre joints, laminating panels, gluing seams and for mounting washbasins.
The product can be used both indoors and outdoors as it does not yellow when exposed to sunlight, is resistant to temperature fluctuations and does not contain VOC. The original colour of the adhesive is maintained despite high humidity. For a resin of this type, it cures at very low temperatures of +1ºC. The combination of these properties makes Glaxs Fast the product of choice for patterned resin applications.
Save production time as the resin cures to a glossy finish and can be cut or polished 40-45 minutes after application. This product does not leave oily or dark spots, especially on light materials.
Glaxs Fast is available in two finishes. The solid type is an opaque colour and is opaque. The translucent type lets some light through and can be used for light coloured modern work surfaces.
This product is a two part cartridge (215ml) and requires the Universal Cartridge Gun for proper mix and consistency. 2 nozzles are included but are also available separately.
Consistency: Gel
For use on: Marble, granite, porcelain, ceramic, ultra-compact surfaces, Dekton, Lapitec and Neolith
Mixing ratio: 2:1
Gel time: 3 – 5 minutes
Shelf life: 18 months (when stored in original packaging)
Use: Indoor & outdoor
Instructions
All surfaces to be treated must be clean, dry and free of dust and grease. In the case of shiny and/or smooth surfaces, lightly sand the surface with sandpaper before application. Remove the threaded end of the tube and remove the cap from the cartridge. Attach the mixer to the cartridge via the threaded nozzle. Before applying the adhesive to the surfaces, apply a small amount of the product in a line of 30-45 cm. Repeat this operation when changing a mixer. After use, clean the nozzle, replace the cap and dispose of the mixer. Only use a suitable gun for the 2:1 ratio, such as the universal cartridge gun. This product does not harden below +1ºC.
Safety
Consult safety data sheet before use. Keep away from heat and humidity. Keep away from direct sunlight.
